Re-Pairing Cino F780BT scanner to Smart Cradle

To pair the BT scanner and the Smart Cradle, both of them should be set to “Uninstall” state...
To pair the BT scanner and the Smart Cradle, both of them should be set to “Uninstall” state.
Uninstall Scanner
To set the BT scanner to “uninstall” state, please scan the barcode below.
cinof780bt_barcode_uninstall
If this fails, please uncrew the end-cap of the scanner, unplug the battery and plug back the battery to do reset the scanner.
Uninstall Cradle
To set the Smart Cradle to “Uninstall” state, please press and hold the reset button (See “3” on the diagram below) for over 3 seconds until the LED indicator begins to display alternate red and green blinks.
cinof780bt_base_station
Pair
To pair, scan the barcode below and then place the BT scanner on the Smart Cradle.
cinof780bt_barcode_pair
What does the LED indicator mean?
cinof789bt_scanner
Cino BT scanner:
status
1 blue blink per 2.5 sec:
Radio connected
Alternate red and green blinks:
“Uninstall” state


Smart Cradle:
status
Centre – steady blue; side – steady green:
Radio connected
Centre – off; side –steady red:
Radio disconnected
Alternate red and green blinks:
“Uninstall” state
© 1996-2017 SumWare Consulting Contact Us